Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - RFD_Nelson

Pages: [1] 2 3
1
Hello lsnyman,

The Simblee for Mobile Android application cannot currently maintain a connection when focus is lost from the app. During an OTA update, the Simblee for Mobile app will be disconnected anyways, as advertising stops, then continues as DfuTarg. In OTA, even if the app could maintain the connection when focus is lost, OTA would break that connection.

I hope this explains the reasoning behind the app disconnection.

Thanks,

Nelson

2
tolson beat me to it.  :D

Yes, please do uncheck "Aggressively Cache Compiled Core" in the Arduino preferences.

Thanks,

Nelson

3
Simblee For Mobile / Re: SimbleeForMobile two screens
« on: August 14, 2017, 06:38:35 AM »
Hi Stanley,

In order to help you further, can you please attach a copy of your sketch?

Thanks,

Nelson

4
BLE and Low Level Development / Re: microsecond delay
« on: August 07, 2017, 07:29:21 AM »
Hi Michael,

Thanks for this post. We've already added this functionality in the Simblee libraries with the function delayMicroseconds().

Thanks,

Nelson

5
Support / Re: Only get one Interrupt
« on: August 07, 2017, 07:27:35 AM »
Hi AKotowski,

A couple of things I would ask you to test out:

Change interrupted to a volatile bool.
Make sure to use dynamic_attachInterrupt() instead of attachPinInterrupt().

Thanks,

Nelson

6
Support / Re: Erratic behaviour when connecting to device
« on: July 28, 2017, 05:18:30 AM »
Hi jetty,

Thanks for your post. Can you tell us what kind of erratic behavior you were experiencing?

Once a SimbleeForMobile connection is made, this is the order of functions:

SimbleeForMobile_onConnect(), ui().

You shouldn't be experiencing any issues with using the Serial.println() function in the SimbleeForMobile_onConnect() function. Please let us know if you are, we'd be happy to support.

Thanks,

Nelson

7
Simblee Libraries / Re: Simblee Dual Mode
« on: July 28, 2017, 05:11:22 AM »
Hi LordOddEye,

Yes, please take a look at the new dual-mode sketch posted in here: http://forum.rfduino.com/index.php?topic=1595.msg6451#msg6451
which shows how to use dual-mode even when the phone is not connected.

Thanks,

Nelson

8
Hi All,

Please take a look at this new sketch that we've created regarding dual-mode capabilities. I think it will answer some questions.

Thanks,

Nelson

9
Hi diepes,

I would recommend upgrading to the newest version of the Arduino IDE and trying again.

Thanks,

Nelson

10
Hi Tim,

Thanks for contacting RF Digital support.

Regarding dual-mode, you must use the LOW_LATENCY mode of SimbleeCOM. Also, since the timing between BLE advertisements is very short, there is time only for a message to be sent and received. Therefore, the half-second delay on the replier will cause your message not to be received.

Thanks,

Nelson

11
Simblee For Mobile / Re: updateRect() causes Android App to Crash
« on: July 24, 2017, 05:25:38 AM »
Hi AKotowski,

Can you please try changing this line:
Code: [Select]
ss = SimbleeForMobile.drawRect(80, 300, 150, 50, RED); to this:
Code: [Select]
ss = SimbleeForMobile.drawRect(80, 300, 150, 50, RED, RED);
and then removing the updateColor() line from the loop()?

Thanks,

Nelson

12
Simblee Libraries / Re: Simblee Library v1.1.3 has now been released
« on: July 11, 2017, 07:08:14 AM »
Hi rtvoorhees,

I would try uninstalling and reinstalling the Arduino IDE and be sure to store the Arduino packages in a different folder than your Dropbox folder.

Thanks,

Nelson

13
Hi iDeveloper,

The name of the device is coded in the sketch, and defaults to "RFduino". If you want to be able to change that from the application, you'll need to connect to the RFduino, send a message which would be recieved in the RFduinoBLE_onReceive() in the sketch telling it to change it's deviceName. Once the deviceName has been changed in the sketch, you'll need to restart RFduinoBLE and restart it before the iOS app would see a different name in the advertisementData.

Thanks,

Nelson

14
Simblee For Mobile / Re: Simblee with Android 7.0 failing
« on: July 10, 2017, 12:29:57 PM »
Hello everyone,

There has been a new version of Simblee for Mobile released that fixes issues found in Android 7.0 devices. Please test it out and feel free to reach out to us if you have any issues.

Thanks,

Nelson

15
Simblee Libraries / Re: Simblee Library v1.1.3 has now been released
« on: June 08, 2017, 11:50:27 AM »
Hi rtvoorhees,

Can you please direct me to a specific example sketch that doesn't work, and also post the full error message here? I have just compiled all of the sensor example sketches without issue on my side.

Thanks,

RFD_Nelson

Pages: [1] 2 3
anything