Author Topic: 10DOF IMU Shield for RFduino MPU-6050, 9DOF MPU-9150, MPU-9250  (Read 5852 times)

tolson

  • Global Moderator
  • *****
  • Posts: 861
  • Karma: +20/-0
    • View Profile
    • Thomas Olson Consulting
I needed a RFduino Shield for the Invensense MPU 6050. Since I already had a GY-87 10DOF IMU break out board I decided to just make a RFduino Shield to mount the GY-87 on. The GY-86 10DOF IMU should also work with this PCB as it has the same pin outs and dimensions.







More details at...
http://thomasolson.com/PROJECTS/BLE/RFduino/RFDGY87/
« Last Edit: February 21, 2015, 05:16:41 PM by tolson »

tolson

  • Global Moderator
  • *****
  • Posts: 861
  • Karma: +20/-0
    • View Profile
    • Thomas Olson Consulting
Re: 10DOF IMU Shield for RFduino MPU-6050, 9DOF MPU-9150
« Reply #1 on: July 21, 2014, 09:45:38 AM »
I needed an RFduino Shield for the Invensense MPU-9150 9-axis IMU. I already had a GY-521 which has the same pin outs as the GY-9150 so I made another adaptor that would fit either of these  to the RFduino. The GY-521 uses the MPU-6050 6-axis chip. The GY-9150 uses the MPU-9150 chip.







More details at...
http://thomasolson.com/PROJECTS/BLE/RFduino/RFDGY521/
« Last Edit: January 11, 2015, 05:32:33 AM by tolson »

alanNZ

  • RFduino Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: 10DOF IMU Shield for RFduino MPU-6050, 9DOF MPU-9150
« Reply #2 on: December 12, 2014, 02:23:39 AM »
Do you have a link to the code you've used?

tolson

  • Global Moderator
  • *****
  • Posts: 861
  • Karma: +20/-0
    • View Profile
    • Thomas Olson Consulting
Re: 10DOF IMU Shield for RFduino MPU-6050, 9DOF MPU-9150
« Reply #3 on: December 12, 2014, 04:42:12 PM »
Do you have a link to the code you've used?

Read through this thread..
http://forum.rfduino.com/index.php?topic=373.0

tolson

  • Global Moderator
  • *****
  • Posts: 861
  • Karma: +20/-0
    • View Profile
    • Thomas Olson Consulting
Re: 10DOF IMU Shield for RFduino MPU-6050, 9DOF MPU-9150, MPU-9250
« Reply #4 on: February 21, 2015, 05:16:21 PM »
I have verified that the popular MPU-9250 break out board, known as the MPU9250/6500, can be mounted on the RFDGY521 adaptor board to provide a I2C MPU-9250 solution for RFduino Shields.





BigD

  • RFduino Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: 10DOF IMU Shield for RFduino MPU-6050, 9DOF MPU-9150, MPU-9250
« Reply #5 on: May 12, 2016, 12:24:59 AM »
Tolson,

I've followed your answers and posts all over this forum for the last few weeks and you appear to be what every forum needs - you're simply always there with an answer and more.

Ive got an RFduino and need to fit a gy521 on it. You've got your amazing units for sale but do they ship to Australia?

Thanks very much,
David

tolson

  • Global Moderator
  • *****
  • Posts: 861
  • Karma: +20/-0
    • View Profile
    • Thomas Olson Consulting
Re: 10DOF IMU Shield for RFduino MPU-6050, 9DOF MPU-9150, MPU-9250
« Reply #6 on: May 12, 2016, 09:55:38 AM »
Hi BigD,

Short answer is.. not readily.

 

anything