Author Topic: Can't compile  (Read 723 times)

parrotcam

  • RFduino Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Can't compile
« on: June 17, 2016, 10:35:39 PM »
I just did a fresh install of the Arduino app in OSX and added the Simblee library. I'm using the Sparkfun breakout version. When I try to compile a program I receive an error message. The last bit of a verbose dump is below. What do i do to fix this? Thanks.


Simblee/hardware/Simblee/1.0.3/variants/Simblee/libSimblee.a" "/Users/kurtmottweiler/Library/Arduino15/packages/Simblee/hardware/Simblee/1.0.3/variants/Simblee/libSimbleeBLE.a" "/Users/kurtmottweiler/Library/Arduino15/packages/Simblee/hardware/Simblee/1.0.3/variants/Simblee/libSimbleeGZLL.a" "/Users/kurtmottweiler/Library/Arduino15/packages/Simblee/hardware/Simblee/1.0.3/variants/Simblee/libSimbleeForMobile.a" "/Users/kurtmottweiler/Library/Arduino15/packages/Simblee/hardware/Simblee/1.0.3/variants/Simblee/libSimbleeCOM.a" “/var/folders/0y/zrmf22vd4c5gzgd09m7q1w_c0000gn/T/
build5782c7bc0a6c6a94262278b223b2f029.tmp/core/core.a" -Wl,--end-group
arm-none-eabi-g++: error: /var/folders/0y/zrmf22vd4c5gzgd09m7q1w_c0000gn/T/build5782c7bc0a6c6a94262278b223b2f029.tmp/syscalls.c.o: No such file or directory
Using library SimbleeForMobile in folder: /Users/kurtmottweiler/Library/Arduino15/packages/Simblee/hardware/Simblee/1.0.3/libraries/SimbleeForMobile (legacy)
exit status 1
Error compiling for board Simblee.


 

flurin4

  • RFduino Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • View Profile
Re: Can't compile
« Reply #1 on: September 01, 2016, 01:31:54 AM »
Check that you're using the correct Simblee address for the "Additional Boards Manager URLs: "

Here's http://forum.rfduino.com/index.php?topic=1304.0 your solution.
Posted at the bottom:

------------------------------------------
For Arduino 1.6.5, use this link:
https://www.simblee.com/package_simblee_index.json

For Arduino 1.6.7 or later, use the following link:
https://www.simblee.com/package_simblee166_index.json