Author Topic: Using The RFduino In Wearable Projects  (Read 1676 times)

cannonball2134

  • RFduino Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Using The RFduino In Wearable Projects
« on: September 18, 2015, 05:34:39 AM »
Hello Everyone,

I have released a crowdfunding campaign for a miniature and wearable electronics platform that uses the RFduino as its core controller, and would really like the RFDuino community to help me, and give some advice and feedback on the campaign.

The electronics modules are one of the smallest wearable electronics platforms available, and helps you create your own heart rate sensor, fitness tracker, temperature monitor, or even detect if your getting too much sun. I have also added a screen module so that you can create your own wireless Microview. Plus i have created a range of 3d printed cases so that the sensors can be used in a variety of different situations.

I would really love to hear what you think.

Here is the campaign link: http://igg.me/at/miniwear

Many Thanks,

James

 

VLorz

  • RFduino Full Member
  • ***
  • Posts: 68
  • Karma: +2/-0
    • View Profile
Re: Using The RFduino In Wearable Projects
« Reply #1 on: September 18, 2015, 11:37:22 AM »
Thanks for the info James.

One question. I'm trying to integrate one miniature OLED like you did in your modules. Could you please recommend us one model and, possibly, the supplier?

Kind regards, Victor

cannonball2134

  • RFduino Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Using The RFduino In Wearable Projects
« Reply #2 on: September 19, 2015, 01:44:48 AM »
Hi Victor,

Have a look at www.buydisplay.com. They have loads of different display's and the prices are pretty good. The one that i am using is:
  • 0.49"OLED Display Module 64x32 Pixel,SSD1306, I2C,White on Black.
http://www.buydisplay.com/default/0-49-inch-oled-display-module-64x32-pixel-ssd1306-i2c-white-on-black

Hope that helps,

Kind Regards,

James

VLorz

  • RFduino Full Member
  • ***
  • Posts: 68
  • Karma: +2/-0
    • View Profile
Re: Using The RFduino In Wearable Projects
« Reply #3 on: September 19, 2015, 04:52:13 AM »
Thanks a lot James, it does help.

Unfortunately this OLED is out of stock but it is a good starting point.

Regards,
Victor