Author Topic: GZZL + BLE  (Read 112 times)

tmsio

  • RFduino Jr. Member
  • **
  • Posts: 37
  • Karma: +0/-0
    • View Profile
GZZL + BLE
« on: November 02, 2017, 11:58:03 AM »
Hi, i have 2 RFduinos with a sensor connected.
Can i connect via app to the rfduino GZLL HOST and read sensor data from RFduino DEVICE0?

Thank You


tolson

  • Global Moderator
  • *****
  • Posts: 870
  • Karma: +20/-0
    • View Profile
    • Thomas Olson Consulting
Re: GZZL + BLE
« Reply #1 on: November 02, 2017, 03:57:21 PM »
There is an example under RFduinoGZLL with BLE. But the trick they are using is turning off BLE while you do GZLL and visa-versa. But, I think the problem arises that the phone looses the BLE connection when you turn off BLE on the RFduino.

Same trick to do it with Simblee. However...
What I want to do is connect to Simblee with Simblee for Mobile as the bridge to then communicate with my RFduino GZLL units using GZLL. There is no support to do this that I have been able to figure out. I want to take advantage of SFM and not have to write a dedicated APP(s). RFdigital suggested using SimbleeCOM, but of course, that doesn't work with RFduinos and the whole point is to get to use Simblee For Mobile with RFduino's even if via a bridge/gateway.





« Last Edit: November 02, 2017, 03:58:57 PM by tolson »

tmsio

  • RFduino Jr. Member
  • **
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Re: GZZL + BLE
« Reply #2 on: November 04, 2017, 06:09:09 AM »
Thank You Tolson, i imagine that.
I will try to turning off BLE i hope app don t lose connnection.

Regards.

Emiliano



 

anything