Author Topic: RF duino conection to Labview in windows  (Read 1921 times)

sabello

  • RFduino Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
    • View Profile
RF duino conection to Labview in windows
« on: March 07, 2014, 01:26:05 PM »
I am trying to transmit data using the RFduino and recive and display it on labview. I am using a USB adapter to detect the RFDUINO. I am able to see and add the rfduino to the computer but The driver installation fail, I do not know if this is necessary. Has anyone been able to connect the RFduino to labview?


.ray

  • RFduino Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: RF duino conection to Labview in windows
« Reply #1 on: April 17, 2014, 03:36:06 PM »
I recommend download and reading the quick start guide. I got stuck on driver too before I read that.

http://forum.rfduino.com/index.php?topic=14.0

Quote from the guide:

Download and install the FTDI USB drivers from
http://www.ftdichip.com/Drivers/VCP.htm
instructions are available here
http://www.ftdichip.com/Support/Documents/InstallGuides.htm

GLeMunyan

  • RFduino Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: RF duino conection to Labview in windows
« Reply #2 on: January 11, 2018, 06:12:17 AM »
Trying to connect  a RFDUINO with LabVIEW with no success. Realize this post is old. I have a RFDUINO broadcasting temperature data and running an iPhone app. Has anyone got this to work. Neither this forum or the National instruments forum has shown solutions