Author Topic: Upload fails with message: "RFduino device required for RFduino hex file"  (Read 791 times)

David

  • RFduino Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Uploading an example fails with the message:

____________________

AdvertisementContinuous.ino.hex


RFduino device required for RFduino hex file

fail.......fail.......fail.......


I followed the instructions on https://github.com/RFduino/RFduino/blob/master/README.md. I am using Arduino 1.6.8 with the rfduino usb shield. I have the same issue on both my mac and my win 10 pc.

Any ideas?

tolson

  • Global Moderator
  • *****
  • Posts: 806
  • Karma: +18/-0
    • View Profile
    • Thomas Olson Consulting
Error message would indicate that you do not have an RFduino installed.
Are you by chance trying to program a Simblee with a RFduino sketch or .hex file?

David

  • RFduino Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Yes, that was it!

Thank you

Amit

  • RFduino Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Upload fails with message: "RFduino device required for RFduino hex file"
« Reply #3 on: December 20, 2016, 02:40:12 AM »
I am getting the same issue. But I have 2.3.2 version of RFDuino installed and RFDuino board selected. Please help...

 

anything