Author Topic: Need help for a project with RFduino and pressure sensor  (Read 1153 times)

soso

  • RFduino Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Need help for a project with RFduino and pressure sensor
« on: March 05, 2016, 07:23:06 AM »
Hi all!
So I have a project in mind but I am very new to programming, RFduino and all of this and kind of lost on where to start. Would love to get some help!
I have bought the RFduino dev kit and the coin battery shield for RFduino. I have 2 pressure sensors (see pictures), one switch (see picture) and an LED light (see pictures).
My idea is as follows: when touching the sensor or applying pressure to it data is sent to an iOS app via Bluetooth, at the same time the LED lights for feedback, to show that an input has been registered. The switch is there to just switch it off when not used.
So I do not know on which pins I should connect which wires and then where to start with programming. Please don’t hesitate to ask more questions if it does not make sense.
Thanks so much!!