Author Topic: How to control sk6822 LED by dmx  (Read 1233 times)


  • RFduino Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
How to control sk6822 LED by dmx
« on: March 24, 2016, 02:09:11 AM »
I want to use sk6822 led for my new project,the advantage is that when one led is broken in seires ,it will not affect the signal transport ,before i used spi to control addressable led strip,now i want to change dmx controller,who can tell me how to do.


  • RFduino Jr. Member
  • **
  • Posts: 30
  • Karma: +0/-0
    • View Profile
Re: How to control sk6822 LED by dmx
« Reply #1 on: October 21, 2016, 02:35:39 AM »
You may refer to the datasheet

1. Float the Din1 
2. Connect Din2 to your CPU GPIO pin
3. Connect the power and ground.

This part is cross part to WS2813 but WS2813 has integrated capacitor, much compact. 
The protocol is similar to WS2812B, SK6812, WS2813. But beware the timing is slightly different. You can try FastLED library as it seems to support SK6822 already. I don't guarantee how well it works because I don't have actual part to test yet. 
« Last Edit: October 21, 2016, 03:16:40 AM by danlsk »