Author Topic: GPIO pins floating before setup  (Read 1174 times)

usrwllm1939

  • RFduino Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
GPIO pins floating before setup
« on: August 20, 2014, 03:23:52 AM »
Looks like the GPIO is floating before setup initializes them. There's  0.7 volts on the pins for ~1 second. Is there any possibility to fix it with the software? Tried with 1k pull down resistor, but it did not fix the problem.
« Last Edit: August 20, 2014, 03:51:09 AM by usrwllm1939 »