Author Topic: Start/Stop Neopixel Strip from iPhone  (Read 1048 times)

Amitrehan

  • RFduino Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Start/Stop Neopixel Strip from iPhone
« on: July 04, 2016, 03:15:45 AM »
hello,

I would really appreciate your help on below

I am running an iPhone app that controls multiple neopixel led strips.

When I click start button 1 or all the strips will show a pattern coded using FastLed and when I click stop button the all the leds should switch off.

I have created a sketch using Timer1 on rfduino that starts pattern display when start command is received. But when I issue stop command rfduino is not responding.

Any help would be very much appreciated.

Regards

Amitrehan

  • RFduino Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Re: Start/Stop Neopixel Strip from iPhone
« Reply #1 on: July 05, 2016, 03:46:36 AM »
Hello RFduino Team,

This is realy critical for my project, I would really appreaciate your help.

Please share some ideas or point me in the right direction.

Regards

tolson

  • Global Moderator
  • *****
  • Posts: 860
  • Karma: +20/-0
    • View Profile
    • Thomas Olson Consulting
Re: Start/Stop Neopixel Strip from iPhone
« Reply #2 on: July 05, 2016, 01:50:51 PM »
I don't know about the RFduino Team,  but from your description there is no way anyone can tell you what you are doing wrong. You need to supply simple example sketch that exhibits what you are doing and seeing, so that someone can replicate your findings.  And a clear schematic description of exactly how you have wired things.
« Last Edit: July 05, 2016, 01:55:23 PM by tolson »

Amitrehan

  • RFduino Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Re: Start/Stop Neopixel Strip from iPhone
« Reply #3 on: July 07, 2016, 03:37:55 AM »
Apologies... I will come post the schematic and sketch tonight...

Regards,