Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - lovelyboy

Pages: [1]
Support / clearing the screen of simblee app
« on: October 09, 2016, 04:21:35 AM »
As, I want simblee app on mobile to behave like webpage. Actually i want to develop app using the cascade of buttons & switches available for programming the simblee app. Like new page of webpage,  as I press any switch/button then new screen should appear on mobile with my new programmed switches & buttons.  Actually I want to use cascade techniques due to below reasons.

1. I need the large number of switches & buttons which are impossible to be mapped on single screen of mobile . let's consider, Screen is full of switches,rectangles & buttons etc, so i want that full screen should act as one page . As I press any dedicated switch/button then it should take me to 2nd page or any page  which also consist of a large number of  screen components.

2. According to mine concept,  If we become successful in cascading screens of Simblee app, then it will acts like proper webpage where we can go any page from main page.  Similarly, we have to first create main screen then it should go any new screen according to corresponding switch we pressed.

I mean functions like SimbleeForMobile.updateScreen, SimbleeForMobile.deleteScreen, SimbleeForMobile.newScreen, SimbleeForMobile.previousScreen, or SimbleeForMobile.createScreen should be included in SimbleeForMobile library so that user can make most of webpage like features.  thanks. i need help for solution of this problem.


Support / saving the data in flash of simblee
« on: October 03, 2016, 09:46:40 AM »
 Need urgent help. As i read , i can transfer my sensor data to flash memory. As i checked out it's example programs. There were 256 pages . 128 pages  were reserved & won't be used  and remaining 128 for user application.ou of which   (4 for sketch) &124 were for user application. As page length is of 1024 bits. if i save the sensor readings as integer which will occupy two bytes of memory. And I have 124 pages to save my sensor data. How many readings i can save on one page of memory. ?

please need urgent help.

Support / writing data in Simbleecloud
« on: September 27, 2016, 07:07:28 AM »
does anyone knows how to program for readings of the internal temperature sensor of Simblee .?actually i have to make my project using sensor readings of Simblee and transfers to Simblee Cloud.   And sensor should take readings of temperature  20 samples per second and continues for  5 minutes(6000 readings) . After, I send that data of the temperature of 5 minutes to cloud. Thereafter I download the readings from cloud to PC. Would you please do it for me . I have urgently need of such program.

program structure:

Sensor(20 readings/sec)(total 6000readings)  + transfered to Simblee Cloud (and saved as file csv format) + can be downloaded in PC from Simblee Cloud.

please help me on urgent basis. because my everything is complete except simbleeCloud  part. I don't know how to transfer data in file  format and download in PC.

Support / sensor_data_writing in file to mobile phone
« on: September 26, 2016, 10:45:13 PM »
Hello everyone.

If I don't use SD card. I want to write sensor data to file in  mobile phone. can I do that because mobile phone has enough memory to save sensors readings. and it will save the time and money of user..but don't know how do it? need help for writing the sensor readings to mobile in file so that i can process it on some platform like Matlab. need urgent help

Support / Saving the sensors readings
« on: September 26, 2016, 04:59:31 PM »
I am using Simblee in application of monitoring sensors. I have problem of saving the sensors data . Please help me I don't know where to save the readings of sensors. Either I should I use external memory or MicroSD shield for SD card?. As my Simblee is away from PC , so I power Simblee using coin battery . I read somewhere that if use MicroSD shield then don't use coin battery because it draws more than 100mA. So please suggest how do I solve my problem of saving the sensors readings ? If I buy MicroSD shield then how do I run MicroSD shield on Simblee which is powered by coin battery .?please need urgent solution of this problem. Thanks

Pages: [1]