Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - RFD_Nelson

Pages: [1] 2 3
1
Simblee For Mobile / Re: SimbleeForMobile two screens
« on: August 14, 2017, 06:38:35 AM »
Hi Stanley,

In order to help you further, can you please attach a copy of your sketch?

Thanks,

Nelson

2
BLE and Low Level Development / Re: microsecond delay
« on: August 07, 2017, 07:29:21 AM »
Hi Michael,

Thanks for this post. We've already added this functionality in the Simblee libraries with the function delayMicroseconds().

Thanks,

Nelson

3
Support / Re: Only get one Interrupt
« on: August 07, 2017, 07:27:35 AM »
Hi AKotowski,

A couple of things I would ask you to test out:

Change interrupted to a volatile bool.
Make sure to use dynamic_attachInterrupt() instead of attachPinInterrupt().

Thanks,

Nelson

4
Support / Re: Erratic behaviour when connecting to device
« on: July 28, 2017, 05:18:30 AM »
Hi jetty,

Thanks for your post. Can you tell us what kind of erratic behavior you were experiencing?

Once a SimbleeForMobile connection is made, this is the order of functions:

SimbleeForMobile_onConnect(), ui().

You shouldn't be experiencing any issues with using the Serial.println() function in the SimbleeForMobile_onConnect() function. Please let us know if you are, we'd be happy to support.

Thanks,

Nelson

5
Simblee Libraries / Re: Simblee Dual Mode
« on: July 28, 2017, 05:11:22 AM »
Hi LordOddEye,

Yes, please take a look at the new dual-mode sketch posted in here: http://forum.rfduino.com/index.php?topic=1595.msg6451#msg6451
which shows how to use dual-mode even when the phone is not connected.

Thanks,

Nelson

6
Hi All,

Please take a look at this new sketch that we've created regarding dual-mode capabilities. I think it will answer some questions.

Thanks,

Nelson

7
Hi diepes,

I would recommend upgrading to the newest version of the Arduino IDE and trying again.

Thanks,

Nelson

8
Hi Tim,

Thanks for contacting RF Digital support.

Regarding dual-mode, you must use the LOW_LATENCY mode of SimbleeCOM. Also, since the timing between BLE advertisements is very short, there is time only for a message to be sent and received. Therefore, the half-second delay on the replier will cause your message not to be received.

Thanks,

Nelson

9
Simblee For Mobile / Re: updateRect() causes Android App to Crash
« on: July 24, 2017, 05:25:38 AM »
Hi AKotowski,

Can you please try changing this line:
Code: [Select]
ss = SimbleeForMobile.drawRect(80, 300, 150, 50, RED); to this:
Code: [Select]
ss = SimbleeForMobile.drawRect(80, 300, 150, 50, RED, RED);
and then removing the updateColor() line from the loop()?

Thanks,

Nelson

10
Simblee Libraries / Re: Simblee Library v1.1.3 has now been released
« on: July 11, 2017, 07:08:14 AM »
Hi rtvoorhees,

I would try uninstalling and reinstalling the Arduino IDE and be sure to store the Arduino packages in a different folder than your Dropbox folder.

Thanks,

Nelson

11
Hi iDeveloper,

The name of the device is coded in the sketch, and defaults to "RFduino". If you want to be able to change that from the application, you'll need to connect to the RFduino, send a message which would be recieved in the RFduinoBLE_onReceive() in the sketch telling it to change it's deviceName. Once the deviceName has been changed in the sketch, you'll need to restart RFduinoBLE and restart it before the iOS app would see a different name in the advertisementData.

Thanks,

Nelson

12
Simblee For Mobile / Re: Simblee with Android 7.0 failing
« on: July 10, 2017, 12:29:57 PM »
Hello everyone,

There has been a new version of Simblee for Mobile released that fixes issues found in Android 7.0 devices. Please test it out and feel free to reach out to us if you have any issues.

Thanks,

Nelson

13
Simblee Libraries / Re: Simblee Library v1.1.3 has now been released
« on: June 08, 2017, 11:50:27 AM »
Hi rtvoorhees,

Can you please direct me to a specific example sketch that doesn't work, and also post the full error message here? I have just compiled all of the sensor example sketches without issue on my side.

Thanks,

RFD_Nelson

14
Support / Re: Simblee GZLL performs worse than RFduino GZLL?
« on: April 10, 2017, 05:11:07 AM »
Hi mjkuwp94,

Thanks for posting this, we'll take a look at the new data. Try something for me please, add SimbleeCOM.mode = LOW_LATENCY; in your setup() before you start SimbleeCOM, and let me know what you get for packet timings.

15
Support / Re: Simblee GZLL performs worse than RFduino GZLL
« on: April 07, 2017, 04:59:39 AM »
Engineering has taken a look at the sketch and we have a few questions:

1. How far apart are the two Simblee's? How far apart are the two RFduinos?
2. According to your results, the Simblee communication is much more stable than the RFduino in terms of jitter. What happens if you increase the packet timing? Every 10ms? 20ms? Does everything come across ok on both devices?
3. What is the cutoff timing that you're seeing? You said the RFduino seems to be able to do 3ms, do you have an excel sheet with results for that timing? How about on the Simblee?

SimbleeCOM is a highly-optimized protocol for sending data between many, many devices on a Simblee network. You could easily broadcast information with 3ms packet latency and 10us jitter to over 100 nodes, or more!

I see that you already have SimbleeCOM functionality built in to your sketch, have you tried this same demo using SimbleeCOM?

You said that you didn't want to go down that rabbit hole, but I highly recommend that you take a look. We would be happy to help in any way we can! There are videos on our YouTube channel (youtube.com/simblee), and in this forum, along with code that shows how to utilize SimbleeCOM, and we have many knowledgable users that I'm sure would be willing to chime in as well!

Again, I'm sorry for the delay in response, I look forward to hearing back from you!

Pages: [1] 2 3
anything