Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - mkay

Pages: [1] 2 3 ... 27
Simblee For Mobile - Android is Now Available on Google Play

Get it here

[EDIT] An the quick start guide is here...

Order/Shipping Questions / Simblee Pre-order Customers
« on: November 13, 2015, 12:52:03 PM »
Hi Simblee Users,

Thank you for supporting Simblee!

At the moment, we are releasing the Simblee Resources to those who have pre-ordered their hardware pre-launch. Please send an email to Simblee at to request documentation and resources. In your email, remember to include your pre-order number, and you will get a response from our team right away!

RFduino Announcements / RFduino v2.3.1 Released with Linux Support
« on: April 21, 2015, 09:55:45 AM »
RFduino v2.3.1 Released now with native linux support!

Please note you must upgrade to Arduino 1.6.3 to use RFduino v2.3.1, installation instructions have changed, please view the readme for instructions (

v 2.3
- RFduino linux native support (test install on Ubuntu 14.04 32bit & 64bit, Fedora 21, OpenSUSE 13.2)
- Created repository for separate installation of projects/previews/demos. Separate installation should make finding them easier.
- Moved iPhone Apps folder to RFduinoApps repository.
- Added Raspberry PI folder to RFduinoApps to demonstrate Raspberry PI & RFduino integration.

RFduino Announcements / RFduino v2.3 Released for Arduino IDE 1.6.3
« on: April 15, 2015, 10:07:14 AM »
RFduino v2.3 Released

Please note you must upgrade to Arduino 1.6.3 to use RFduino v2.3, installation instructions have changed, please view the readme for instructions (

v 2.3
- Fixes required to support Arduino 1.6.3 (NOTE: Arduino 1.6.3 or higher is now required for RFduino 2.3 or above).
- Include explicit information about Java 6 (thanks gortok)
- Fixed analogRead freeze problem + fixing indentation (thanks OrenLederman)
- Removing deprecated field in iOS framework and sample projects (thanks SensiBots)
- Make these virtual (thanks tripzero)
- Remove dependence on UIKit; fix use of deprecated UUID attribute (thanks aeberbach)

Simblee Announcements / Simblee
« on: April 02, 2015, 07:28:19 PM »
Hi Everyone,

Check out this new part we've been working on, its called Simblee. It will not replacing the RFduino but it will be compatible with the RFduino ecosystem. A lot of cool stuff coming to the RFduino ecosystem. It is still a few months out, we'll be posting new information as it becomes available.

<a href="" target="_blank" class="new_win"></a>

More info and datasheet available at

RFduino Announcements / Re: RFduino v2.2.4 Released
« on: February 12, 2015, 09:12:10 PM »

With RFduino v2.2.4, the first compile will still take a few seconds, but all subsequent compiles of the sketch will be many times faster. To benefit from this update, you should upgrade to Arduino 1.6

RFduino Announcements / RFduino v2.2.4 Released
« on: February 12, 2015, 09:10:49 PM »
RFduino v2.2.4 Released

v 2.2.4
  - Reduce compile times with Arduino 1.6 on second and subsequent compiles.

v 2.2.3
  - GZLL baseAddress enhancement (thanks waynek/jetty840)
  - Check base address msb is not 0x55 or 0xaa
  - Updated libRFduinoGZLL keywords.txt
  - Added DeviceToHostSettings example GZLL sketch

Suggestions / Re: Uart-Problem
« on: January 29, 2015, 02:03:32 PM »
Hi m6vitek, I will try to replicate this on my end...

Getting Started / Re: S130 BLE Stack on RFduino
« on: January 29, 2015, 01:54:45 PM »
Hi Luis, we don't currently support running the S130 stack.

Support / Re: firmware/sketch security
« on: January 29, 2015, 01:53:55 PM »
Hi Tim,

The code you load on the RFduino is automatically protected against readback. This readback lock cannot be changed or modified. If one wanted to remove the protection, they would have to perform a FULL CHIP ERASE, losing everything on the part.

Getting Started / Re: Input and output of the RFduino
« on: January 05, 2015, 03:33:53 PM »
The 2 GPIOs are used for programming, only when loading code. Once your code has been loaded, they are free to use assuming you don't connect them to anything that will interfere with programming.

For example you can have those 2 GPIOs connected to LEDs, this generally won't interfere with programming.

Getting Started / Re: Adding some buttons
« on: December 09, 2014, 05:36:21 PM »
The MCP23008 or MCP23017 don't support PWM. There are dedicated I2C PWM ICs out there you can use.

Getting Started / Re: random number generator
« on: December 09, 2014, 05:34:55 PM »
Access to the RNG is restricted when the BLE stack is running.

Hi, make sure you are using Arduino v1.5.7 and up.

I verified changing the CELSIUS and FAHRENHEIT references to CELSIUS1 and FAHRENHEIT1 compiles fine for me.

Pages: [1] 2 3 ... 27